Processor    

    Support for Intel® Core™ i7 processors/Intel® Core™ i5 processors/ Intel® Core™ i3 processors/Intel® Pentium® processors/Intel® Celeron® processors in the LGA1155 package
    L3 cache varies with CPU

(Some Intel® Core™ processors require a graphic card, please refer "CPU support List" for more information.)
Chipset    

    Intel® H67 Express Chipset

Memoria    

    2 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
    * Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
    Dual channel memory architecture
    Support for DDR3 1333/1066/800 MHz memory modules
    Support for non-ECC memory modules

(Go to GIGABYTE s website for the latest supported memory speeds and memory modules.)
Onboard Graphics    Integrated in the Chipset:

    1 x D-Sub port
    1 x DVI-D port, supporting a maximum resolution of 1920x1200
    * The DVI-D port does not support D-Sub connection by adapter.

Audio    

    Realtek ALC888B codec
    High Definition Audio
    2/4/5.1/7.1-channel
    * To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.

LAN    

    1 x Realtek RTL8111E chip (10/100/1000 Mbit)

Expansion Slots    

    1 x PCI Express x16 slot, running at x16 (PCIEX16)
    * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
    1 x PCI Express x16 slot, running at x4 (PCIEX4)
    2 x PCI Express x1 slots
    (All PCI Express slots conform to PCI Express 2.0 standard.)

Multi-Graphics Technology    

    Support for ATI CrossFireX™ technology
    * The PCIEX16 slot operates at up to x4 mode when ATI CrossFireX™ is enabled.

IDE ATA    Chipset:

    2 x SATA 6Gb/s connectors (SATA3_0, SATA3_1) supporting up to 2 SATA 6Gb/s devices
    4 x SATA 3Gb/s connectors (SATA2_2~SATA2_5) supporting up to 4 SATA 3Gb/s devices
    Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
    * When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.

USB    Chipset:

    Up to 14 USB 2.0/1.1 ports (8 on the back panel, 6 via the USB brackets connected to the internal USB headers)

Internal I/O Connectors    

    1 x 24-pin ATX main power connector
    1 x 4-pin ATX 12V power connector
    2 x SATA 6Gb/s connectors
    4 x SATA 3Gb/s connectors
    1 x CPU fan header
    1 x system fan header
    1 x front panel header
    1 x front panel audio header
    3 x USB 2.0/1.1 headers
    2 x serial port headers
    1 x clearing CMOS jumper

Rear Panel I/O    

    1 x PS/2 keyboard port
    1 x PS/2 mouse port
    1 x D-Sub port
    1 x DVI-D port
    8 x USB 2.0/1.1 ports
    1 x RJ-45 port
    3 x audio jacks (Line In